Panel - Simple Walking Circuit Diagram
By Ken Martin, ; posted February 24, 2006; hits 1924
| Here is a handy circuit if you want to operate a path in one of two directions on each sucessive ground on the control ground. It uses two AF-512 Wire Spring Relays which have a set of EMB "Early Make Break" contacts. Note the 210 ohm resistors that limit the current while the relays change state. Apply ground on control lead relay W operates. Remove ground relay Z operates. Apply ground again and relay W releases. Remove ground and relay Z releases. Kind of interesting. From Panel notes 4-5-1972. Two years later and this C.O. was No. #1 ESS. |
Back
